Coin Roll Crimpers/Rollers 3D Printer Model
The file 'Coin Roll Crimpers/Rollers 3D Printer Model' is (stl) file type, size is 3.8MB.
The file 'Coin Roll Crimpers/Rollers 3D Printer Model' is (stl) file type, size is 3.8MB.
I wanted to make a coin roll crimper/roller that crimps the end of the tube to be round instead of flat.
The downside to this is that because it's 3D printed, there are sharp edges. Due to this, it will slightly tear the tube while crimping.
I may visit this project again later, as I tried to use this with a hand drill to quickly roll the end of the tube. Sadly due to this being printed in PLA, I am unable to try this without melting through the plastic. I have made this with just a flat rolled end instead of the pillars, but it does not work very well at all.
If you enjoy my designs, please feel free to donate to me :)
PayPal: paypal.me/toastnips
CashApp: $toastnips
CryptoCurrency
Bitcoin: 19oB6HYwXfkUT7fSYzESqvzJSwC9i8gaMg
Litecoin: MX2AsxxUVHPfPoMaQbTRKNX7iXTGx5jVp6
Ethereum: 0x83fc9d017f41dEDEbC8b56Ff9319E8da1f6cDadE
| All_Crimpers_in_One.stl | 8.6MB | |
| Dime_Coin_Roll_Crimper.stl | 2.3MB | |
| Nickel_Coin_Roll_Crimper.stl | 2.4MB | |
| Penny_Coin_Roll_Crimper.stl | 2.3MB | |
| Quarter_Coin_Roll_Crimper.stl | 1.6MB |
