Coin Magazine 3D Printer Model
The file 'Coin Magazine 3D Printer Model' is (stl) file type, size is 414.7KB.
The file 'Coin Magazine 3D Printer Model' is (stl) file type, size is 414.7KB.
This object design purpose is let you collect many the same coins in advance become a one object in bag or somewhere, and then you can go to taken directly for your needed, no need to pick out correct value in a bunch of different coins.
Note:
1.If you cannot buy springs of the appropriate size, Custom springs by myself may be required.
In my case, I used metal wires from the exhaust ducts to make springs and used "link" parts to connect it, because I couldn't make a long enough spring at one time.
I just provide the simple spring making jig i used, just in case maybe someone need it.
2.This object is designed based on the size of the New Taiwan Dollar(NT$).
Although the "$" on "holder" parts will make people think it is fit U.S. dollars but it's not.
(I realized this when I was uploading.)
Maybe you can change the % of the 3D model become fits your coin size when printed.
3.The "body" & "cover" combination requires super glue.
| 10NTD_body.stl | 40.1KB | |
| 10NTD_cover.stl | 33.8KB | |
| 10NTD_holder.stl | 282.7KB | |
| 10NTD_spring_link.stl | 288.9KB | |
| 1NTD_body.stl | 68.5KB | |
| 1NTD_holder.stl | 273.4KB | |
| 1NTD_over.stl | 40.6KB | |
| 1NTD_spring_link.stl | 311.0KB | |
| spring_jag-13mm_bar.stl | 51.1KB | |
| spring_jag-13mm_handle.stl | 46.4KB | |
| spring_jag-15mm_bar.stl | 54.4KB | |
| spring_jag-15mm_handle.stl | 46.4KB | |
| spring_jag-body.stl | 156.7KB |
