This is a little Rubber-Band powered quarter dispenser I made to be put into a cup holder of a car to hold quarters. There are catches in the container and on the 2 plungers for the rubber band. I would like to print this eventually, but as of now I do not know if it works well, or if it prints very well.
Thanks, and any suggestions are appreciated, as this is the first thing I have made. If you think you can make it work well, feel free to try to make it, just comment at least so I can learn what I screwed up.
Original file made in Tinkercad here: https://tinkercad.com/things/82BcN5TzLTq
04/28/12-I have now added a version that has been "fixed" in netfabb cloud, so the stl file should print better.
04/29/12- I have made a V2 file that allows the plungers to be inserted through the bottom, then a piece to slide in to cover the bottom. FOR V2 YOU MUST PRINT THE V2 FILE AND THE PLUNGERS (Error in TinkerCAD)
TO DO:
-Print :-P
-Fix lip, make sure can print
-Make TinkerCAD work with plungers in V2
| Coin_Holder.stl | 102.4KB | |
| Coin_Holder_fixed.stl | 207.0KB | |
| Coin_Hold_V2.stl | 130.0KB | |
| Coin_Hold_V2_fixed.stl | 248.1KB | |
| Coin_Plungers.stl | 34.7KB | |
| Coin_Plungers_fixed.stl | 34.7KB |
