Coffee Press Tamper For Espresso Manual Machines 3D Printer Model
The file 'Coffee Press Tamper For Espresso Manual Machines 3D Printer Model' is (stl) file type, size is 1.8MB.
The file 'Coffee Press Tamper For Espresso Manual Machines 3D Printer Model' is (stl) file type, size is 1.8MB.
Press to tamp coffee in portafilter (with spouts or naked).
With changeable tamper sizes (mount with thin wood screw). Choose one with best fit or create own (cylinder with 9mm thickness and inner diameter of portafilter basket).
Base was designed for my Gaggia 58mm naked portafilter, so maybe will not fit perfectly bigger ones.
Mount with M5x50mm screws.
V2.1: I updated base, so it is a little bit shorter and stronger.
V2.2: Updated base for portafilters with room for spouts shifted to back (handle direction).
V2.3: CeP_Base_v2.stl - Updated base for Lelit portafilter with those fancy slide spouts.
| CeP_Base.stl | 1.4MB | |
| CeP_Base_v2.stl | 1.2MB | |
| CeP_Lever_A.stl | 211.6KB | |
| CeP_Lever_B.stl | 45.6KB | |
| CeP_Tamper_55convex.stl | 583.3KB | |
| CeP_Tamper_55flat.stl | 64.3KB | |
| CeP_Tamper_57convex.stl | 574.7KB | |
| CeP_Tamper_58convex.stl | 570.4KB | |
| CeP_Tamper_58flat.stl | 64.5KB | |
| CeP_Tamper_base.stl | 383.5KB | |
| CeP_Tamper_base_v2.stl | 382.7KB |
