Coffee Bean Clip 3D Printer Model
The file 'Coffee Bean Clip 3D Printer Model' is (stl) file type, size is 3.4MB.
The file 'Coffee Bean Clip 3D Printer Model' is (stl) file type, size is 3.4MB.
In my opinion the coffee bean did not get as much attention on Thingiverse as it should get. Therefore I have created a coffee bean clip for you. It has magnets inside and will firmly close your already opened coffee bags. It also works for other bags you would like to keep closed.
The clip is powered by 3 Neodym magnets 12x12x12 mm (0.47x0.47x0.47 inches) on each side. Altogether you need 6 Neodym magnets. Of course the clip also works with 2 magnets on each side but the holding power will be less. In my tests I found out that 3 magnets on each side are perfect.
Some glue work is required after the print. There are insets for the magnets which make sure that the 2 parts of each side of the coffee bean are flush when you add them together. Please note the assembly instructions below.
If you like the coffee bean clip, checkout the coffee bean keychain:
https://www.thingiverse.com/thing:6661978
Enjoy printing this object.
| Coffe_bean_clip_left_lower_V1.stl | 1.8MB | |
| Coffe_bean_clip_left_upper_V1.stl | 2.2MB | |
| Coffe_bean_clip_right_lower_V1.stl | 1.6MB | |
| Coffe_bean_clip_right_upper_V1.stl | 2.1MB |
