Cobra Cooler Plus Rear Mount Remix For The Maker Select Plus 3D Printer Model
The file 'Cobra Cooler Plus Rear Mount Remix For The Maker Select Plus 3D Printer Model' is (stl) file type, size is 2.3MB.
The file 'Cobra Cooler Plus Rear Mount Remix For The Maker Select Plus 3D Printer Model' is (stl) file type, size is 2.3MB.
Note: I no longer have that printer so I will not be able to do any further work on this file.
Big thanks to the original designer. I love the design but I could not find it for the Plus. Modded in TinkerCad. Mount with a 4mmx16mm screw before mounting the fan. The fan itself needs a screw that is at least 24mm long I think I used M3. You could use a tight Zip tie too.
I used this Fan: https://www.amazon.com/Uxcell-Brushless-Sleeve-Bearing-Cooling-Blower/dp/B016XMK6SE/ref=sr_1_2?ie=UTF8&qid=1487374645&sr=8-2&keywords=24v+fan
It plugs directly into the existing socket. If you can't find it, just get a 24V 50x15mm blower fan.
NOTE: I found after rebuilding my hot end that the tolerances were different and the fan was lower than the head. I am printing and testing a fix today.
| Cobra_Plus.stl | 6.9MB |
