Various bases I've created for my Space Marine army. These would work for any of GW's current systems, but I haven't made an exhaustive list of bases, only the ones in my current army. The bases themselves are only a starting point, I find adding a bit of sand, flock and doodads goes a long way in not looking 3d printed.
I've uploaded the dxf I use to slice up new bases in fusion 360. I simply import it, and an appropriate sized circle, then select the correct regions and extrude upwards to desired heights. I usually go up 0.3 for the base, then 0.6-0.75 for the individual tiles to give slight variation, skipping a few.
| 25mm_cobble_1.stl | 459.6KB | |
| 25mm_cobble_2.stl | 405.2KB | |
| 25mm_cobble_3.stl | 546.2KB | |
| 25mm_cobble_4.stl | 449.9KB | |
| 25mm_cobble_5.stl | 504.1KB | |
| 32mm_cobble_1.stl | 626.4KB | |
| 32mm_cobble_10.stl | 768.6KB | |
| 32mm_cobble_2.stl | 716.4KB | |
| 32mm_cobble_3.stl | 677.6KB | |
| 32mm_cobble_4.stl | 756.2KB | |
| 32mm_cobble_5.stl | 756.2KB | |
| 32mm_cobble_6.stl | 624.8KB | |
| 32mm_cobble_7.stl | 699.0KB | |
| 32mm_cobble_8.stl | 640.5KB | |
| 32mm_cobble_9.stl | 721.3KB | |
| 40mm_cobble_1.stl | 852.8KB | |
| 40mm_cobble_2.stl | 924.2KB | |
| 80mm_cobble_1.stl | 3.1MB | |
| baseTemplate.dxf | 610.0KB |
