CNC Edge Alignment Fence For 20x20mm Section 3D Printer Model
The file 'CNC Edge Alignment Fence For 20x20mm Section 3D Printer Model' is (scad,stl) file type, size is 1.1KB.
The file 'CNC Edge Alignment Fence For 20x20mm Section 3D Printer Model' is (scad,stl) file type, size is 1.1KB.
This is just a simple project I did to make a small fence that fits on the side of the bed of my cheap Chinese CNC router. I decided to make them so that I can keep material aligned with the edge of the bed when clamping down before routing or lasering - they can be easily removed after clamping if desired. Hopefully I'll find other uses for them too :-)
The OpenSCAD file is included for customisation. I included variables for the length and fence height (that's the height above the bed, not the total height). I also included a snugness factor variable that can be adjusted to make the finished model fit snuggly in the 20x20mm extruded-section slots.
And if you're interested you can also read my blog-post about this project at the link below.
https://cncmakerzone.co.uk/cnc-bed-edge-fence-made-with-a-3d-printer
If you like this design, why not buy me a coffee:
| cncedgefence.scad | 832.0B | |
| cncedgefence.stl | 8.2KB |
