CNC Acrylic Gear Train 3D Printer Model
The file 'CNC Acrylic Gear Train 3D Printer Model' is (nc,STL) file type, size is 48.7KB.
The file 'CNC Acrylic Gear Train 3D Printer Model' is (nc,STL) file type, size is 48.7KB.
This gear train was designed from scratch as a gear desk toy. If cut properly, minimal drilling should be required to use two M4 bolts and washers (or 8-32) and thread them into the gear train base.
If you've got similar materials on hand, use the provided g-code to cut your own. If not, you can still get the 3D model and put it through CAM yourself. Created to be CNC'd; milled on the Sienci Mill One.
Material: 6mm acrylic
End Mill: 2-flute, 1/8″ flat end
Cutting Time: 14 minutes
| gear_train.nc | 44.9KB | |
| Gear_Train.STL | 168.2KB | |
| gear_train_base.nc | 10.6KB | |
| Gear_Train_Base.STL | 24.9KB |
