CN Tower 3D Printer Model
The file 'CN Tower 3D Printer Model' is (stl) file type, size is 5.7 MB.
The file 'CN Tower 3D Printer Model' is (stl) file type, size is 5.7 MB.
I've always loved Toronto's tallest free standing structure and was looking for something to practice my Fusion 360 skills with so I designed this to-scale architectural model of the CN Tower. The entire model was designed and split with Fusion 360.
It's split up in such a way that it doesn't need support for any pieces and will fit together even without glue (hopefully).
It IS scaled down to be completely printable on a small Ultimaker 2 Go but you can definitely scale it up if you wish, I designed it at almost 5 times the scale it's at now. If you're interested in scaling it up just take the 'CN_Tower_Base_1' file and see how big you can make it, it's the biggest piece of the set. At current scale the entire model will be about 33 inches tall.
Edit: Added a 1 piece file for those who want to print the whole thing at once! Remember to use support for this one!
I really love how this turned out, hope you do too!! Post any questions you have in the comments :)
| CN_Above_Bottom_Windows.stl |
| CN_Bottom_Connector.stl |
| CN_Bottom_Windows.stl |
| CN_Main_Roof.stl |
| CN_Middle_Windows.stl |
| CN_Tip_Above_Bottom.stl |
| CN_Tip_Bottom.stl |
| CN_Tip_Top.stl |
| CN_Top_Windows.stl |
| CN_Tower_Base_1.stl |
| CN_Tower_Base_2.stl |
| CN_Tower_Base_3.stl |
| CN_Tower_Base_4.stl |
| CN_Tower_Base_5.stl |
| CN_Tower_Top.stl |
| CN_Tower__1piece.stl |
| CN_Under_Tip_Top.stl |
