This is a stand for CM030 (Glock 18C replica by CYMA). You NEED paulodrugos' motor cover to install it. If you also printed paulodrugos' base_plate_cover, you can slide it at the end of the stand so you dont lose it.
Print this as you want, but I recommend that you set infill at 20% for good rigidity. No supports necessary.
You can find the "G18C Motor cover" by paulodrugos here: http://www.thingiverse.com/thing:2670858
Link to the bullets : www.thingiverse.com/thing:2332362
| G18C_Stand_2.stl | 2.0MB | |
| G18C_Stand_for_bullets.stl | 906.4KB |
