Clock One 3D Printer Model
The file 'Clock One 3D Printer Model' is (stl,pdf) file type, size is 7.4MB.
The file 'Clock One 3D Printer Model' is (stl,pdf) file type, size is 7.4MB.
This a mechanical clock that I have designed and built using 3D printed parts
Find more detailed instructions here:
It has hours, minutes and seconds, a Graham, or dead beat escapement, it is powered by weights, it has ratchets on the pulley to facilitate rewinding.
It will run for about 5 hours, there is a nut to fine tune the speed on the pendulum
See it here:
https://youtu.be/wh0CArhOsug
https://youtu.be/KoyZZXEglnw
Find instructions and list of hardware needed on the attached PDF in the Thing Files:
Clock One build instructions.pdf
| aBackFrameNoBushing.stl | 347.2KB | |
| adjustNut.stl | 494.2KB | |
| aFrontFrameNoBushing.stl | 322.4KB | |
| anchorDeadbeat.stl | 111.8KB | |
| backFrame.stl | 80.5KB | |
| backFrameEscape.stl | 76.6KB | |
| Clock_One_build_instructions.pdf | 4.6MB | |
| end.stl | 516.8KB | |
| escapeWheel.stl | 145.6KB | |
| Face.stl | 250.5KB | |
| frontFrame.stl | 203.4KB | |
| frontFrameEscape.stl | 39.6KB | |
| gear10.stl | 151.4KB | |
| gear30.stl | 329.5KB | |
| gear32.stl | 341.4KB | |
| gear60_8.stl | 399.3KB | |
| gear64_8.stl | 467.7KB | |
| gear8.stl | 154.1KB | |
| hourHand.stl | 37.4KB | |
| minuteHand.stl | 22.3KB | |
| nutM8.stl | 188.4KB | |
| PendulEnd.stl | 42.5KB | |
| pendulLever.stl | 49.1KB | |
| pendulumHalves.stl | 906.5KB | |
| plugBig.stl | 190.4KB | |
| plugSmall3-4.stl | 124.1KB | |
| pulleyHalf.stl | 246.2KB | |
| pulleyRatchet.stl | 335.1KB | |
| ratchet.stl | 47.8KB | |
| ratchetHolder.stl | 90.5KB | |
| screwPendul.stl | 4.4MB | |
| secondFace.stl | 76.3KB | |
| secondHand.stl | 40.1KB | |
| spacer68.stl | 28.4KB | |
| stopRing.stl | 42.1KB | |
| washerP.stl | 32.1KB |
