I've always liked the simplicity and compactness of A26's design on this clock.
I tried to remix it a bit before, but once I saw RGB5391's excellent make https://www.thingiverse.com/make:568043 I decided to try and do a proper remix.
I strengthened the frame and incorporated a clock face to the top frame using KySyth's nice OpenSCAD Clock generator https://www.thingiverse.com/thing:2011116 I also tightened up the tolerances for the 3mm rods in the frame and wheel parts.
I used "uxcell 10Pcs 150 x 3mm Stainless Steel Cylinder Linear Rail Round Rod Shaft" from Amazon for the rods.
UPDATE: I've added a cap for the clock hands rod to help keep the gears in place. I've printed mine in flexible filament.
| Clock_by_A26_Remix_-_Anchor_v2.stl | 83.0KB | |
| Clock_by_A26_Remix_-_Cap.stl | 85.5KB | |
| Clock_by_A26_Remix_-_Escapement_v2.stl | 256.6KB | |
| Clock_by_A26_Remix_-_Face.stl | 452.2KB | |
| Clock_by_A26_Remix_-_Frame.stl | 243.5KB | |
| Clock_by_A26_Remix_-_Hour_Hand.stl | 22.7KB | |
| Clock_by_A26_Remix_-_Minute_Hand.stl | 21.4KB | |
| Clock_by_A26_Remix_-_Penny_Weight_Bottom.stl | 705.1KB | |
| Clock_by_A26_Remix_-_Penny_Weight_Top.stl | 63.8KB | |
| Clock_by_A26_Remix_-_Quarter_Pendulum.stl | 80.6KB | |
| Clock_by_A26_Remix_-_Wheel_2.stl | 253.2KB | |
| Clock_by_A26_Remix_-_Wheel_3.stl | 315.1KB | |
| Clock_by_A26_Remix_-_Wheel_4.stl | 366.5KB | |
| Clock_by_A26_Remix_-_Wheel_5.stl | 985.6KB |
