The original phone grip clips are too small to support a large phone or a phone with cover, so I made these larger grip clips to replace the original ones.
I recommend printing with 4 walls, the layer height is optional. To install you will need a needle or a small stick to push the metal stick that connects the pieces. It is really an easy process but you must be patient, I suggest using a tool to lightly tap (your support stick or needle) and slowly pull out the metal stick from gimbal, avoid deforming the metal stick so you can use it later. It is also advisable to directly and only support the section of the gimbal where the metal stick is to avoid damaging the mechanism of the other sections.
Use common sense, do not do the process while the Gimbal is on. The process is simple and really easy to do, but it requires being careful, I am not responsible for any damage you may cause to your device.
SmoothQ4_ZHIYUN_CLIPS_by_Hecben.stl | 19.4KB |