Hold with crimp shape, 29mm deep and 100mm wide, with a hole for an M10 bolt and two holes for wood screws.
It hase been printed with the fuzzy skin option provided by Ultimaker Cura
Filament:
Wood like filament: https://amzn.to/48mbIwT
To achieve a textured grip, I recommend this filament. It contains a percentage of wood that gives it a non-slip finish, making it very suitable for printing climbing holds.
Printing Recomendations:
2mm wall
1.3mm top/Bottom Thickness
25% infill
Printing Temp: 208º
Plate Temp: 55º
Infill flow: 102%
| Regleta29x100.stl | 1.1MB |
