Cleveland Software Design Virtual Pinball Service Board Mount Bracket 3D Printer Model
The file 'Cleveland Software Design Virtual Pinball Service Board Mount Bracket 3D Printer Model' is (stl) file type, size is 29.4KB.
The file 'Cleveland Software Design Virtual Pinball Service Board Mount Bracket 3D Printer Model' is (stl) file type, size is 29.4KB.
Cleveland Software makes some really great virtual pinball boards, one of them is a service board designed to allow you to easily access the service menu in pinball games.
The problem is the cable and design makes it rather awkward to mount in a cabinet.
This bracket is designed to solve that, allowing for it to be easily mounted, and the slot underneath allows for the ribbon cable to be managed if needed.
You can mount the board to either side of the bracket depending on what angle you need. Just use small wood screws and screw it directly into the plastic. This makes the service board accessible when the coin door or lid is opened on your pin ball machine, while also keeping it out of the way.
Designed to be printed upright without need for supports. The board is very light, and uses 4 small screws, so it's plenty sturdy such that you can print with a relatively low percentage of infill, and I used adaptive layers to speed things up. I would suggest at least 4-6 wall layers minimum so the screws have something substantial to bite into when mounting.
| CSD_Service_Board_Cab_Mount.stl | 91.6KB |
