Clean / Dirty Magnet For Dishwasher 3D Printer Model
The file 'Clean / Dirty Magnet For Dishwasher 3D Printer Model' is (stl) file type, size is 216.5KB.
The file 'Clean / Dirty Magnet For Dishwasher 3D Printer Model' is (stl) file type, size is 216.5KB.
While I didn't use KFayal's model to make mine, the look of Dishwasher Clean/Dirty Placard inspired my creation.
This model is designed to use four 8mm x 3 mm magnets (I bought mine on Amazon). The magnets are concealed within Base, kept in place by Casing. The "Clean" / "Dirty" letters snap into place (or glue them).
The tolerances are tight. If your calibration is off, you might have problems putting the letters into Base or putting Base into Casing.
UPDATE: I've included - with tolerance versions of Case and Base which probably most people will prefer as they include a 0.1mm tolerance.
| Base.stl | 154.7KB | |
| Base_-_with_tolerance.stl | 239.4KB | |
| Casing.stl | 25.7KB | |
| Casing_-_with_tolerance.stl | 44.4KB | |
| Clean.stl | 174.5KB | |
| Dirty.stl | 88.3KB |
![Friendly Articulated Slug With Hidden Magnets [reupload] 3D Printer Model](https://res.3axis.co/8c9bc02b-3db4-4c45-9e54-6243151f30e0/images/80ff8e24-0018-4f27-8c11-42832f0eb96f_thumb.jpg)
