This is a rotating axis joint I designed for a Texas star clay target (for 5 clay). It's designed to utilize 2 22mm skateboard bearings. The wood sticks can be found at home depot (or any other hardware store) and measure roughly 14mm X 17.5mm. The clay holders can be found at this link https://www.thingiverse.com/thing:2369862. This was printed on a Maker Select v2 @ 215°c with 1.2mm walls and top/bottom.
I have added end caps and the skeet holder with a loop in the back for a zip tie. I am working on a zip tie-less design. You can also use the end caps on a stick and stick them vertically into the ground to have standing skeet targets.
For best results scale up 1%! Happy shooting!!
| Clay_End_Cap.stl | 568.2KB | |
| Clay_Holder.stl | 11.0KB | |
| Clay_Polish_Star_Holder.stl | 1.3MB |
![Wingman | Apex Legends [Easy Print] W/ Stand 3D Printer Model](https://res.3axis.co/fcb4d074-b5fe-436f-92c3-a1fa2800d49c/images/ebc2f28b-95b0-4c64-b7dc-d708ef150464_thumb.jpg)
