Classic Omnitrix V2 3D Printer Model
The file 'Classic Omnitrix V2 3D Printer Model' is (stl) file type, size is 1.5MB.
The file 'Classic Omnitrix V2 3D Printer Model' is (stl) file type, size is 1.5MB.
(NON FUNCTIONAL VERSION)
Here's the newest improved classic Omnitrix to add to the collection. This newer version is takes on a more creative approach with how everything designed, the cuff designed with a more comfortable shape around the wrist. this model is still made in broken up pieces to help with painting. This file set also includes a base stand to display and show off your finished product when not handled.
Additional notes:
(Check out my Insta @vinsil for further instructions)
•Sliding separated cuff does not require any glue, magnets, straps, etc. it should hold together just by friction.
•Glue or preferred adhesive will still be needed for the following parts- Icon to core (with dial in-between), and activation button to cuff.
•check your wrist size measurements by width and spread before printing (this was designed specifically for my wrist being approx. 48mmx63mm, you will need to rescale it with your preferred method if need be). Measurements were taken from top to side as shown in demonstration picture.
•Most parts were designed with printer tolerance in mind but sanding will still be needed if they do not fit correctly.
•Although the Base/ Strap with tabs is labeled as “Stunt prop” it is highly advised you don’t too much force, after some testing, it usually will come apart when swinging your arm vigorously.
•Separating Cuff is recommended to be printed with the given orientation but feel free to experiment. The unmodified version will need to be properly orientated once downloaded.
•Stand base will need a small bit of craft foam on the top curve to prevent paint from scratching.
•Friction lock might become loose after prolong period of usage.
| Button_Joined.stl | 240.2KB | |
| Button_Separated.stl | 223.4KB | |
| Core.stl | 219.7KB | |
| Core_Joined.stl | 797.0KB | |
| Cuff_Separated_1.stl | 737.0KB | |
| Cuff_Separated_2.stl | 142.8KB | |
| Cuff_Unmodified.stl | 869.0KB | |
| Dial.stl | 616.7KB | |
| Display_Base.stl | 451.7KB | |
| Icon.stl | 47.8KB |
