Model of class 754, a diesel-electric locomotive in H0 scale.
The locomotive was produced in Czechoslovakia and used for passenger’s and freight's transport.
Model can be equipped with DC micro motor drive.
Drive system was inspired by:
https://www.thingiverse.com/thing:4183383
Used components:
LED lights 1.8mm diameter red and white:
https://www.aliexpress.com/item/1005004999517487.html?spm=a2g0o.order_list.order_list_main.35.18081802dXaLiy
Model was printed with 0.4mm nozzle. There is not require for support, but I recommend use brim for better adhesion (except undercariage.stl, which has a lot of printed surface area). Use 100% infill for small parts and cabin.stl because it has thin walls. The undecariage.stl part can be printed on lower infill, e.g. ~25%.
0,6mm steel wire was used as handrails.
Enjoy :)
| boggie.stl | 6.5MB | |
| bumpers.stl | 428.9KB | |
| cabin.stl | 5.9MB | |
| cabin_holder.stl | 53.4KB | |
| couplers_mount.stl | 151.9KB | |
| horn.stl | 129.0KB | |
| reservoir.stl | 1.1MB | |
| steps.stl | 49.4KB | |
| undercariage.stl | 6.3MB |
