A bracket for a clamp rack in my workshop. Two brackets support a 20mm x 45mm baton of wood. The brackets are attached to the wall with 3 x 3.5mm countersunk screws.
My clamps are pretty light, but if you want to make a really long rack or your clamps are very heavy, you might want to pull the vertical tabs (where the screws attach) out a bit and increase the radius of the join.
Designed to print without support material.
| ClampRackBracket.f3d | 370.4KB | |
| ClampRackBracket.stl | 680.5KB |
