CL-260 173mm X 17mm COB LED Strip Misumi 2020 Mount 3D Printer Model
The file 'CL-260 173mm X 17mm COB LED Strip Misumi 2020 Mount 3D Printer Model' is (stl) file type, size is 9.4KB.
The file 'CL-260 173mm X 17mm COB LED Strip Misumi 2020 Mount 3D Printer Model' is (stl) file type, size is 9.4KB.
This is a COB LED Mount for the 173mm x 17 mm LED Strips that i have found at the german Ebay in a 4 pack from China, there where sold as "Tagfahrlicht" LEDs for cars...
I tried a several other bracktes that are here on Thingiverse but none had the fit I wanted
so I made this one...
It is designed to fit on the 2020 Profiles with M3 Screws and T-nuts.
Also there are 2.6mm square holes for the cables at both ends, because you can daisychain them with
their powerlines.
The whole bracket size is 225mm L x 20mm W x 25mm H and the angle for the LED is 45°
the size of the LEDs I used is with thier aloy housing is 173mm x 17mm x 2.8mm
The LEDs hold in there by sliding them in, so first push the cables trough the holders and then slide one side complete in then align the cables and slide the Led to the center and thats it... in my case thay fited perfectly but maybe you have to scale them a bit.
If you liked it please share a picture of your make.
| CL-260_COB_LED_Mount.stl | 37.3KB |
