City Of Oxwell – House 3D Printer Model
The file 'City Of Oxwell – House 3D Printer Model' is (stl) file type, size is 141.9MB.
The file 'City Of Oxwell – House 3D Printer Model' is (stl) file type, size is 141.9MB.
Welcome to the City of Oxwell building set! Build unique shops and homes for your adventurers to explore!
This is a sample set from the Kickstarter containing (1) floor piece, (1) first floor piece and (1) roof piece. The whole set can be found on Kickstarter here:
https://www.kickstarter.com/projects/fantasyportals/city-of-oxwell
Update 1/10/2021
Roof piece has been updated to help give some shingles more support. Because the roof is rounded and the shingles are flat, some pockets were present between them. These have been filled. The new roof piece is roof_v1.1_peg.
Update 1/2/2021
Peg version of sample has been added. Pegs are built into the pieces to help with alignment and secure them from moving if bumped. Peg pieces cannot be mixed with non peg pieces.
First Floor piece has been thickened to accommodate peg system.
Roof_v1_peg has been widened slightly so shingles pass over sides of floor piece. I think this looks better.
NOTE: This set is a work in progress. I am making changes to the set based on backer feedback on Kickstarter. A new note will be added when the project is finished.
| first_floor_v1.stl | 52.2MB | |
| first_floor_v1_peg.stl | 28.6MB | |
| floor_v1_peg.stl | 17.6MB | |
| roof_v1.1_peg.stl | 37.4MB | |
| roof_v1.stl | 40.1MB | |
| wood_floor.stl | 17.0MB |
