4 CHANNEL
530 gr without electronics
780 gr ready to fly
2 METER 3D PRINTABLE CIRRUS GLIDER.
I SATTLED ON THIS DESIGN AFTER MANY ITERATIONS.
WINGS ARE NOT FULLY 3D PRINTED.
I CHOOSE HYBRID DESIGN SINCE IT CUTS WEIGHT AROUND %40.
ALL FILES,ROUGH GUIDE AND STEP FILE IS IN THE ZIP FOLDER.
i used;
cheap offbrand 30 A esc.
1400 kv brushless
4 micro servo ,
11.1 V 3S Lipo
flysky tx/rx
9.8X5 foldable prop
what you need to buy to build.
4x micro servo (9g)
foldable prop
3x 1mm steel rod for elevator and rudder + needed for hinges.
covering film 64x100cm enough
4x 5x5 square wood rod (1m each)
4x 3x7 " " rod
3x 13x3 " " rod
| CHECK_ZIP_FOLDER_FOR_FILES_.stl | 183.4KB | |
| CIRRUS.zip | 27.6MB |
