This compass allows you to draw circles of 2cm and more, the holes are spaced 0.5cm from each other.
Reference for print settings
Recommended layer height 0.2 mm.
Shell 2 loops
Filling 20%
Upper thickness 1.5mm
Bottom thickness 1.5mm
All data can be 3D printed without supports on FDM 3D printers.
*extra charge
Depending on the printer conditions, slicer settings, filament, etc., the ball bearing may be difficult to press in after printing, it needs to be forced in.
| all.stl | 6.9MB | |
| bottom_cap.stl | 124.3KB | |
| caps.stl | 1.3MB | |
| compas_body.stl | 5.6MB | |
| up_cap.stl | 1.2MB |
