Cinelog35 V2 Walksnail Moonlight Mount Kit 3D Printer Model
The file 'Cinelog35 V2 Walksnail Moonlight Mount Kit 3D Printer Model' is (stl) file type, size is 85.3KB.
The file 'Cinelog35 V2 Walksnail Moonlight Mount Kit 3D Printer Model' is (stl) file type, size is 85.3KB.
When ordering the analog version there is only one whole for the camera mount, which requires a new mount for the Walksnail system. This version can be used for the Moonlight, but also any other Walksnail camera with 2 mounting wholes.
The Moonlight VTX is slightly bigger than an O3 unit the Cinelog35V2 was designed for. It works with the Moonlight kit, but the airflow is limited, therefore the 2 or 3mm spacer help a bit. Both work fine, but I would recommend the 3mm, which has just enough clearance.
| 2mm_Abstandhalter-Body.stl | 12.0KB | |
| 3mm_Abstandhalter-Body.stl | 11.6KB | |
| Walksnail_mount-Body.stl | 331.1KB |
