3.5" rocket dragster quad built around the bottom plate of some random cinewhoop (cinelog 35) because i didn't feel like cutting a monoplate for something so simple. Recommend dremeling off the excess carbon bits like i did.
Arm aero and inner mount held on with double sided tape. battery held on with ummagrip lite and a rubber band. rocket canopy held on with a single rubber band across 2 arms for a quick release. camera angle is 65 degrees. cam, gps,rx, vtx all held on with double sided tape.
The battery bay is sized specifically for an r-line 6s 550.
The camera mount is sized specifically for a caddx ant lite.
The gps mount is sized specifically for a goku gm10 nano.
Deviate from this BOM at your own risk.
hit 134mph with the voltage hitting 2.0v per cell at full throttle. the battery got so hot it warped the print and puffed. this is kind of a glass cannon type build. biblade props would be better for speed.
I printed out of petg but lightweight pla would be better.
| arm_aero_stingray.stl | 992.7KB | |
| center_mount.stl | 148.8KB | |
| cone.stl | 2.3MB |
![[JENO 5.1″] Protection Bras Classic 3D Printer Model](https://cdn.3axis.co/assets/35/e1/a8/ef/35e1a8ef-91d7-46ff-842f-03a7197b4fb7/images/4cb9b982-6db6-4345-9dbb-0bbccc2eb1dc_thumb.jpg)
![The Calimero Mini [2 Inch] 3D Printer Model](https://cdn.3axis.co/assets/a3/40/75/f6/a34075f6-5633-4b60-92c3-c34e5b9c0115/images/a9dafed5-ea96-4071-a79a-3b6b14d743a6_thumb.jpg)
