CieloLume Lamp 3D Printer Model
The file 'CieloLume Lamp 3D Printer Model' is (STL) file type, size is 5.0MB.
The file 'CieloLume Lamp 3D Printer Model' is (STL) file type, size is 5.0MB.
CieloLume Lamp (Kit 001)
Hidden Wiring Desk Lamp
The lamp comes with two interchangeable lampshades, and it can also be used without a lampshade.
Side Cover: Be careful with the orientation when sliding it in.
Bottom Cover: Press it firmly into place during installation. If it’s too tight, you can use a knife to trim some of the protrusions on the sides.
For KIT001 switch installation: Press the button while sliding it into the bottom track, then push it forward until the button pops out of the lamp's switch hole. To remove it, press the button all the way down and pull the switch out.
Considering the lamp's heat and the flexibility of the Bottom Cover, PETG material is recommended.
The lamp body can include supports; the Slim lampshade doesn’t require supports, but the Tall lampshade does.
| Base.STL | 4.8MB | |
| Bottom_Cover.STL | 213.1KB | |
| Shade_Slim.STL | 328.8KB | |
| Shade_Tall.STL | 7.0MB | |
| Side_Cover.STL | 37.4KB | |
| Top_Cover.STL | 100.9KB |
