Christmas X-mas Winter Sceneries For LED Tealight 3D Printer Model
The file 'Christmas X-mas Winter Sceneries For LED Tealight 3D Printer Model' is (stl) file type, size is 1.6 MB.
The file 'Christmas X-mas Winter Sceneries For LED Tealight 3D Printer Model' is (stl) file type, size is 1.6 MB.
Inspired by similar but much bigger lighted winter/christmas sceneries I thought I would to try to make a small scenery to put on top of a LED-tealight.
I searched Thingiverse for suitable objects and found a lot, but not all were printable in the desired very small size. I did a lot of testing with various objects and settings to find a decent solution.
Final versions are an easy to print "Winter village scene" and a (much) harder to print "Deer family scene".
Both versions are only printable in 0.1mm resolution (or finer) and -very important- with proper retract settings to avoid stringing. If you are not sure, try settings in your slicer that force retracts even after minimum travel and minimum extruded material - thus unfortunately resulting in longer printing times due to the many retracts. But you will get almost string-free prints with the proper settings!
(I found out that changing temperate between 195° and 220° only had very little influence on stringing issues, but retract settings are most important!)
The simple cup (as case for the LED-tealight) is a very easy print, which can be fast printed with a 0.25mm resolution.It is optimized for 0.4mm nozzle, as the walls are 0.8mm thick which allows fast circular printing.
Print as many of theses as you wish and use them for stocking stuffing or giveaways, but please don't sell them!
Of course all credits for the nice original objects go to the original authors, see section "Remixed from" on the left side! Thanks for sharing these!
Happy X-mas everyone!
...and I would be happy to see some makes!!!
| final_base.stl |
| final_deer.stl |
| final_village.stl |
