Christmas Tree (vase Mode) With Decorative Inlay 3D Printer Model
The file 'Christmas Tree (vase Mode) With Decorative Inlay 3D Printer Model' is (step,stl) file type, size is 314.2KB.
The file 'Christmas Tree (vase Mode) With Decorative Inlay 3D Printer Model' is (step,stl) file type, size is 314.2KB.
Print the tree and tree peak in vase mode with PLA or PETG clear or good translucent filament.
Print the inlay in clear or translucent PETG and assign colors you like to the ribbon parts and stars. Bend the conical shape and insert it in the tree. Put the engraved side inwards. PETG is advised for flexibility as PLA clear tends to break when bending small radii (tip of the cone shape)
All printed with 0.4 nozzle and 0.2 layer height. For the star in vase mode I used a brim.
The model can be scaled down to 50%. Under 75% the led for the peak will not fit trough anymore and can only lid the star from below. Scaling the inlay is only in XY direction, do not scale in height!
| Cone_Christmas_Tree_Inlay_for_remix.step | 401.6KB | |
| Cone_Christmas_Tree_Inlay_multicolor.stl | 373.1KB | |
| Cone_Christmas_Tree_Top_vasemode.stl | 49.5KB | |
| Cone_Christmas_Tree_vase_mode.stl | 367.0KB |
