Christmas Toy 3D Printer Model
The file 'Christmas Toy 3D Printer Model' is (stl) file type, size is 5.8MB.
The file 'Christmas Toy 3D Printer Model' is (stl) file type, size is 5.8MB.
Christmas Toy
Assembly is required.
Assemble instruction is in my youtube channel
https://youtu.be/xnrzO_mabic
No extra parts needed, which are can't make with 3D printer such as metallic springs, bolts and etc.
Caution: Keep it in pop-up mode, when it is not in play. The 3d printed spring will lose its elasticity.
The parts are designed and tested to fit each other, however the tolerance is depends on a 3d-printer's condition.
Please remove the supports completely. May need a sandpaper or cutter while assemble the parts.
| Base.stl | 2.6MB | |
| Button_01.stl | 1.6MB | |
| Button_02.stl | 16.8KB | |
| Button_Guide.stl | 410.4KB | |
| Button_Latch.stl | 800.5KB | |
| Button_Pin.stl | 382.3KB | |
| Button_Spring.stl | 335.4KB | |
| Chair_01.stl | 1.1MB | |
| Chair_02.stl | 1.8KB | |
| GiftBox_01.stl | 1.9MB | |
| GiftBox_02.stl | 1.1MB | |
| GiftBox_03.stl | 479.7KB | |
| GiftBox_04.stl | 684.0B | |
| GiftBox_05.stl | 684.0B | |
| GiftBox_06.stl | 109.9KB | |
| GiftBox_07.stl | 19.1KB | |
| GiftBox_Toy_01.stl | 313.2KB | |
| GiftBox_Toy_02.stl | 2.5MB | |
| GiftBox_Toy_03.stl | 160.2KB | |
| GiftBox_Toy_04.stl | 324.5KB | |
| Popup_Arm.stl | 1.7MB | |
| Popup_Lift.stl | 1.2MB | |
| Popup_Lift_Joint.stl | 672.0KB | |
| Popup_Spring.stl | 938.5KB | |
| Santa_Boot_Left_Black.stl | 68.4KB | |
| Santa_Boot_Right_Black.stl | 70.0KB | |
| Santa_Coat_Left_White.stl | 508.7KB | |
| Santa_Coat_Red.stl | 1.2MB | |
| Santa_Coat_Right_White.stl | 510.3KB | |
| Santa_Coat_White.stl | 897.2KB | |
| Santa_Face.stl | 390.9KB | |
| Santa_Hat_Red.stl | 13.5KB | |
| Santa_Head_White.stl | 926.4KB | |
| Santa_Mitten_Left_Red.stl | 19.8KB | |
| Santa_Mitten_Right_Red.stl | 19.8KB | |
| Santa_Pants_Left_White.stl | 292.9KB | |
| Santa_Pants_Red.stl | 115.7KB | |
| Santa_Pants_Right_White.stl | 292.9KB |
