The file 'Christmas Stocking Mantel Shelf Holder Hook 3D Printer Model' is (stl) file type, size is 50.9KB.
I needed a low profile stocking holder that I could fasten underneath a floating shelf. This would work on other places as well, any place where you would want to fasten the hook underneath such as a shelf or mantle.
I looked around before creating this and didn't come up with what I was looking for, so I sketched this one up quick in Tinkercad.
The screw holes are 4mm. I used #6 - 3/4" pan head screws to fasten them to my 3/4" thick floating shelf.
Your settings will likely vary from mine on my Creality Ender 3 Pro.
Slicer: Cura with Tab Anti Warping Extension by 5axes. I placed tabs on the edges of where the holes are. On my initial print, I was having warping as the edges lifted off the build plate. The Tab Anti Warping Extension solved that for me. It would likely be different if I has an enclosure, but I don't.
Inland PLA+ @ 50mm/sec
218°C Nozzel Temp
60°C Bed Temp.
Infill @ 60%
Supports: I chose to print supports everywhere, (personal preference)
Bed adhesion: Skirt & Tab Anti Warping Extension
Christmas_Stocking_Mantel_Shelf_Hook_Clip.stl | 150.8KB |