Christmas Stocking Hangers 3D Printer Model
The file 'Christmas Stocking Hangers 3D Printer Model' is (stl) file type, size is 228.4KB.
The file 'Christmas Stocking Hangers 3D Printer Model' is (stl) file type, size is 228.4KB.
I wanted something a little better looking than tape or blue tack to hang the stockings on the fire place.
So modelled up these weighted Christmas Stocking Hangers,
I made 5 different Anchor variants so to avoid repeats on your fireplace they are,
HO HO HO, SANTA, JOY, NOEL and Mix Anchor
the Anchor has been designed with 2 x 30mm diameter voids inside them so coins or washers can be dropped inside during the print to add weight, and they all work with the same Hook.
The Hook is best printed on its side so to add inherit strength in the extruded lines and is a nice push fit so no glue is really needed that way if one is broken by your little Elf you don't need to re print the entire anchor.
I printed mine in Fillamentum Signal Red / Green Grass with Gold Happens Details. using the pause at height feature of Cura (I paused mine at 20.5mm high with 0.15mm layer heights) and they came out Great
I printed mine on my CR-10 had had no problems at all with any of the bridges both visible and internal
I hope you enjoy these and if you make any please post pictures, I would love to see them.
Merry Christmas
| Hook.stl | 24.9KB | |
| HO_HO_HO_Anchor.stl | 192.9KB | |
| JOY_Anchor.stl | 113.6KB | |
| Mix_Anchor.stl | 499.5KB | |
| NOEL_Anchor.stl | 127.8KB | |
| SANTA_Anchor.stl | 129.2KB |
