Christmas Stocking Container 3D Printer Model
The file 'Christmas Stocking Container 3D Printer Model' is (stl) file type, size is 2.7 MB.
The file 'Christmas Stocking Container 3D Printer Model' is (stl) file type, size is 2.7 MB.
The Christmas Stocking Container is a screw cap container that looks like a Christmas Stocking. At standard scale the internal storage area is 35mm in diameter and 80mm tall... so plenty of space for small treats!
This is an easy print but does require good build plate adhesion to ensure the stocking prints well. Print the cap in white and the stocking in red...
This design can be scaled up but scaling down will result in insufficient thread clearance so the cap and stocking won't screw together correctly. Printed at standard scale on a well set up PLA machine with a filament fan, the parts should screw together easily straight off the build plate.
Please refer to the instruction, print settings and images for additional information.
Note: if you like this check out the rest of my fun and practical designs!
Tips: Tips are not expected but are appreciated as they help offset my filament costs as much as anything else. However, as I live outside the USA tips cannot be sent to me via PayPal.Me as that service is not supported in my region and this is beyond Thingverse's control. If you feel like sending a tip please use regular PayPal and send it to [email protected] and, to those who do, thanks in advance!
| cap.stl |
| stocking.stl |
