Christmas Star Puzzle 55mm 3D Printer Model
The file 'Christmas Star Puzzle 55mm 3D Printer Model' is (stl) file type, size is 17.4KB.
The file 'Christmas Star Puzzle 55mm 3D Printer Model' is (stl) file type, size is 17.4KB.
You need 12 spikes for one star:
10x "normal" spike with two pins and three holes
2x "top" spike with five pins
There is also the "top spike" with hole to put cotton or wire through.
Number in the name of the file = gap between pins and holes
0050 = 0,050 mm
0075 = 0,075 mm
Sometimes the gap 0,05mm is too tight (depends on material and printer settings) so I made the second version. Or you can change scale of model.
Infill (fill density): 0%
Bottom (and top) solid layers: 0
Perimeters: 2
Vist also big version:
Christmas Star Puzzle 300mm
| Star_55mm_0050_Spike_10x.stl | 7.0KB | |
| Star_55mm_0050_Spike_Top_2x.stl | 8.7KB | |
| Star_55mm_0050_Spike_Top_with_hole_1x.stl | 12.8KB | |
| Star_55mm_0075_Spike_10x.stl | 7.0KB | |
| Star_55mm_0075_Spike_Top_2x.stl | 8.7KB | |
| Star_55mm_0075_Spike_Top_with_hole_1x.stl | 12.8KB |
