created this star like the appearance of herrnhut stars. Glue the top and bottom Part of the framework together with the pins inserted. You also have to glue the spikes and brackets OR print the combinded version with normal mode till ... mm and than in vase-mode (create this model later)
The adantage is, that the dissassembly is possible exept of the frame.
I dont know if you can screw every lampadapter, but I designed it for the "creative cable EIVA" for hopefully waterproof assembly.
You need 28 Screws of 10-20mm.
print...
| Pin_19mm.STL | 144.2KB | |
| Pin_20mm.STL | 144.2KB | |
| Pin_21mm.STL | 131.5KB | |
| Pin_22mm.STL | 136.2KB | |
| Pin_23mm.STL | 134.7KB | |
| Pin_24mm.STL | 125.3KB | |
| star_clamping-adapter_long-screw.STL | 129.0KB | |
| star_clamping-adapter_short-screw.STL | 110.4KB | |
| star_framework_bottom.STL | 199.3KB | |
| star_framework_top.STL | 248.5KB | |
| star_spike-square_17x.STL | 1.4KB | |
| star_spike-square_17x_bracket.STL | 122.7KB | |
| star_spike-triangular_8x.STL | 171.7KB | |
| star_spike-triangular_8x_bracket.STL | 62.4KB |
