tone001's Christmas Reindeer kit Card was almost perfect in every way. However, I was having a few issues:
- Lifting from the bed - I think this was mainly due to my room being so cold and the fact I use blue painters tape without a heated bed, but I have added some 'mouse-ears' to the design and would recommend printing at a diagonal across the print bed if you can (see image)
- Post print assembling blues - after struggling to assemble a printed stag (and breaking a few antlers in the process), I decided to tweak the size of the holes so that it was easier to put together. This does mean the final assembled stag is a little looser than the original design, but it should hold together or it can be secured with some glue.
As I was Tinkering with the file I couldn't resist increasing the height of the nose so that we could have a red nosed reindeer! If you pause the print at 2mm in height and change your filament colour to red, it will print the last 0.5mm of your print just on the nose.
Maybe I should change the name to Christmas Rudolph Card Kit....
