Lighted Christmas presents for outdoor display under my small front porch Christmas tree.
https://youtu.be/apYVuf92JlU
Use CA glue to assemble (sorry no high precision snap together stuff here).
The white box segments are the same for both presents, just different orientation.
The ribbons I printed with 3 top/bottom layers and 0% infill.
All PLA, solid white for the box and translucent for the ribbons.
For the bottom I used 4 mm corrugated plastic.
The diffusers in the square box are these https://www.thingiverse.com/thing:2550235
Tall box parts:
(4) box_corner or (1) mybox1
(1) mybow1a
(1) mybow1b (print on side, 0% infill)
(3) myribbon1a
(1) myribbon1_cord
(1) pixel_ring1
(4) standoff_35mm
(4) coroplast_clip_to_pla
Low box parts:
(4) box_corner or (1) mybox1
(1) mybow1a
(1) mybow1b (print on side, 0% infill)
(3) myribbon1_alt_side
(1) myribbon1_alt_side_cord
(2) myribbon1_alt_top
(1) pixel_ring1_alt
(4) standoff_15mm
(4) coroplast_clip_to_pla
Also included are the 123D-Design files for making variations.
| box_corner.stl | 4.6KB | |
| coroplast_clip_to_pla.stl | 4.3KB | |
| edge.stl | 21.2KB | |
| mybow1a.stl | 8.7KB | |
| mybow1b.stl | 1.1MB | |
| mybox1.123dx | 153.6KB | |
| mybox1.stl | 18.1KB | |
| mybox1_alt.123dx | 153.0KB | |
| myribbon1.stl | 3.0KB | |
| myribbon1_alt_side.stl | 2.2KB | |
| myribbon1_alt_side_cord.stl | 8.9KB | |
| myribbon1_alt_top.stl | 2.2KB | |
| myribbon1_cord.stl | 9.7KB | |
| pixel_ring1.stl | 187.0KB | |
| pixel_ring1_alt.stl | 145.4KB | |
| standoff_15mm.stl | 29.7KB | |
| standoff_35mm.stl | 35.7KB |
![Knifey [Toy Story] 3D Printer Model](https://cdn.3axis.co/assets/fb/32/6e/80/fb326e80-7e1a-4646-a4b9-22c62237b718/images/b45604ac-2887-4383-9a78-b2b3a2a2b28c_thumb.jpg)
