Simple Christmas Ornament

This simple Christmas ornament is a good addition to any maker's tree for the holidays. It prints fast and well on most printers making it also wonderful for that one person you know you forgot to get a present. If you want, download either the version with the heart, hyphen, or nothing depending on who you want to give it to. The ones with the heart and hyphen leave room for you to put your name (text size may be smaller than shown in the example one for names with more than six letters).

Versions

Current Version: 1.0

Future Versions

In future versions (likely 1.1) the background of the ornament will get a better design. An easy to edit customize-able version (likely 1.2) will be added to allow people to more easily add their name after the heart under where it says "Merry Christmas" for a more personal delivery to friends and family. In a soon update (likely 1.2) videos will be added.

Recommended Settings

Settings in order from: Cura
If you want to download Cura you can get it from the Ultimaker website HERE

Layer Height: 0.06 (mm)
Wall Thickness: 0.06 (mm)
Top/Bottom Thickness: 0.06 (mm)

Infill Density: 100 (%)
Gradual Infill Steps: 0

Printing Temperature: Varies based on material
Build Plate Temperature: Varies based on material
(Filament) Diameter: 1.75 (mm)
Flow: 100 (%)
Enable Retraction: Enabled (Click the box until a check mark appears)

Print Speed: 20 (mm/s)
Travel Speed: 60 (mm/s)

Enable Print Cooling: Enabled (Click the box until a check mark appears)

Generate Support: Enabled (Click the box until a check mark appears)
Support Placement: Everywhere (Click the drop-down arrow and select)
Build Plate Adhesion Type: Select Any (Not Needed)
Print Sequence: Select Any (It's only one piece)

*Please Note The settings above will not be in the same order for all software. As well, this is not sponsored by Ultimaker, it is just my personal preference to use because it is powerful and free.