Christmas Lithophane Ornament 3D Printer Model
The file 'Christmas Lithophane Ornament 3D Printer Model' is (stl) file type, size is 40.8MB.
The file 'Christmas Lithophane Ornament 3D Printer Model' is (stl) file type, size is 40.8MB.
Hi!
I created these Christmas ornaments with Santa Claus lithophanes, using the bulb found at the following link as a reference:
https://www.amazon.it/dp/B01FF07XFE?ref=ppx_yo2ov_dt_b_product_details&th=1
If the link doesn't work, you can easily find them on Amazon by searching for "LED for balloons."
The bulb has a diameter of 11 mm, but it comes with a small transparent silicone ring that brings it to a diameter of 13 mm.
This simply fits into the hole of the Christmas ornament and, thanks to the silicone ring, it locks into place.
To turn it on and off, simply rotate the bulb to the right and left.
I've also added some profiles with a 15 mm diameter hole as I've seen that there are bulbs with this diameter as well, or simply to facilitate the work for those who want to fill them with an LED strip.
Merry Christmas!
| N1.stl | 28.0MB | |
| N2.stl | 4.5MB | |
| N3.stl | 4.5MB | |
| N6.stl | 22.4MB | |
| N7.stl | 28.0MB |
