Christmas Bauble Ornaments 3D Printer Model
The file 'Christmas Bauble Ornaments 3D Printer Model' is (stl) file type, size is 35.8MB.
The file 'Christmas Bauble Ornaments 3D Printer Model' is (stl) file type, size is 35.8MB.
This year I've designed these Christmas Bauble Ornaments. I was inspired by traditional bauble ornaments, but with a twist. I made these to give to my family and would love to share them with all of you. There are four versions included.
These are designed to work screw eye hooks. I recommend getting screw eye hooks with ~8mm(5/16") long screw and a thread diameter of ~2mm(5/64"). I used Hillman Brass Screw Eye Hooks #852420 and pre-drill the hole to ~2.3mm(3/32"). This was much larger than recommend for the screw eyes, but because the PLA is harder than wood, it was need to prevent snapping the screw eye. I recommend doing some trials with different size drills to suit you hooks. I recommend printing these at 0.2mm layer height or finer and with a print speed about 70% because of the steep overhang to avoid curling.
See designs from previous years here:
Snowflake Ornaments
Fractal Tree Ornaments
I hope you enjoy making these for your loved ones.
Merry Xmas
| BaubleA1.stl | 15.1MB | |
| BaubleA2.stl | 21.1MB | |
| BaubleB1.stl | 16.0MB | |
| BaubleB2.stl | 29.4MB |
