This is a series of mazes I designed after viewing Kevin Kennedy's video on cylinder mazes on the YouTube channel ProductDesignOnline. Please check it out.
I am a Christian and noticed a lack of Bible based objects to download. These are designed for amusement and also to be used as a ministry tool. The versions vary, but each contains a clue or two to help the user solve the puzzle. These clues reflect the idea that one must go through Jesus. The inside of the cylinder is hollow to enclose tracts, or candy for the younger crowd. The JM5 maze is designed for grades 7 and up. The JM7 maze is designed for grades 4-6 and the kid maze is just that - for kids. You will notice the exit path is above the small cross on the base and the guide notch is on a small cross on the cap. So, keep your eye on the cross!
These are designed to be printed in PLA without supports at a low layer height (0.1-0.15) for best result. They can be printed at 0.2mm layer height, but the quality goes down a bit. I have been printing them on a SnapMaker2 A350 and a FLSUN QQ Delta printer. The SnapMaker results are better.
| JM5.stl | 996.4KB | |
| JM7.stl | 317.0KB | |
| kid-maze.stl | 3.4MB | |
| maze-cap.stl | 308.4KB | |
| maze-cap_with_clue.stl | 724.5KB |
