Beer Mug I made for Chmielaki 2021 (Beer Festival in Krasnystaw, Poland)

It's unofficial mug with two carps as in Krasnystaw's emblem and some hop + text.

My Beer Mugs Collection
https://www.thingiverse.com/c47_3d/collections/39075953/things

It is made for decoration or for holding a bottled beer, can or a 0,5l plastic cup (after resizing to 120%).

Fits standard diameter beer bottle (there is a 72mm hole).
You can resize the model in slicer for different diameters. Use the equation:
X / 72 * 100%
where X stands for the diameter you want + 2mm (for a 'safe distance')
So for example for a beer can (66mm, so X will be 68) you need 94,5% size
For a 0.5l plastic cup go with 120%
Remember to check the widest area (like the bottom of the bottle)

More photos:
https://www.instagram.com/p/CSXQNHPNF4_/

Printed on JGMaker A1 with Pearl Gold PLA and Stone Age PLA from Spectrum
Designed and sculpted in Blender 3D

Update 11 VIII 2021
Version 1.1 added.
Slighty smaller mug but with same hole (will need less filament) (silver model on photos)
Added two vertical holes inside to hide the Z-seam and prevent it from taking the space needed for a bottle, can or plastic mug or a glass.
Handle top will not be over the mug top so you can put it upside down now.

On photos with silver model (v1.1) the text is moved to left, it's fixed now

Update 22 VIII 2021
Handle is little closer to the mug
Rounded top part of the handle
Print-tested on 120% size (for plastic beer cups)