This is my design of a Chisel Sharpener.
The Rail Inner is 169mmx65mm.
The Sled is riding on the 8mm overhang.
The ankle of the sled is 25 degrees.
The slot and the holes are made for M4 Hex bolts and nuts
| Chisel_Sharpener.stl | 247.7KB | |
| Holder_-_1.stl | 34.0KB | |
| Holder_-_2.stl | 34.0KB | |
| Nut.stl | 86.0KB | |
| Sled.stl | 5.7KB |
