Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
Filaments Used:
PLA Overture Black Transmission Distance: 0.7
PLA Overture Light Gray Transmission Distance: 0.7
PLA BambuLab Basic Silver Transmission Distance: 0.5
PLA Overture White Transmission Distance: 4.4
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Light Gray
At layer #15 (1.28mm) swap to Silver
At layer #18 (1.52mm) swap to White for the rest.
| Samurai_Fighting_Front_200x200.stl | 95.9MB |
