Children's clothes at home more and more, the hanger is not enough, the universal hanger is not good to install and take, so the design of this children's hanger, using the universal size, 30cm length, reference to a lot of hangers, children's hangers are generally 30cm, this size also happens to be the limit of the 256x256 size of the hotbed, considered the design of the folding, but it will increase the cost and reduce the strength, so this model is taking into account the cost of printing time and strength, 1 roll of consumables can be printed almost 70 hangers, the cost is almost as low as 0 yuan. Therefore, this model is taking into account the cost of printing time and strength, 1 roll of supplies can print almost 70 hangers, the cost can be almost as low as 0.5 yuan, the printing time is also very short, two of a tray of printing time of almost 1 hour or more, the very time to replace the commodity hangers.

The advantage of printing your own is that you can choose the colour, half-roll, expired supplies can be used to print hangers.

Actual test use is very friendly, hollow version unless the winter cotton clothes may be deformed, other clothes are no pressure. Reinforced version is recommended for heavy clothes.

Two versions for speed and quality

The design process has gone through several iterations.

The children's clothes have all been replaced with their own printed hangers, replacing many metal hangers that can be used by adults.