This is a replica of the safety latch by EliteNetworks. I eliminated the corner brace so that it will print well without support. I also countersunk the screw holes so it works well with standard wood screws.
Update: I rounded off the sharp tip because it was too poky. I also added a fillet in the corner to relieve the stress and make it less prone to break off. New version is mylock3.scad.
| mylock.scad | 1.0KB | |
| mylock.stl | 29.9KB | |
| mylock3.scad | 1.5KB | |
| mylock3.stl | 34.5KB |
