This is a 1:150 scale Chieftain Mk.5.
There are two versions of the hull -- one complete, the other in two parts split fore and aft for smoothest FDM printing of the very shallow curves of the hull front.
The turret-plug has been separated from the turret proper so that the turret can be printed flat on the print bed, and has had a socket applied so the turret can be magnetized. I've subdivided and smoothed the polygons of the turret front so that it prints more smoothly in the larger scale, and I've removed the mantlet cover.
I have thinned down the tracks and added some detail there.
This is a remix from a model intended for printing at 6mm scales designed by captain_ahab, who did all the hard work. The original can be found at https://www.thingiverse.com/thing:3221650
| ChieftainMk5_Hull_1-150.stl | 1.9MB | |
| ChieftainMk5_Hull_split.stl | 2.5MB | |
| ChieftainMk5_TurretPlug_1-150.stl | 18.8KB | |
| ChieftainMk5_Turret_1-150.stl | 582.7KB |
