Chicken Waterer 3D Printer Model
The file 'Chicken Waterer 3D Printer Model' is (blend,stl) file type, size is 235.6KB.
The file 'Chicken Waterer 3D Printer Model' is (blend,stl) file type, size is 235.6KB.
This is a 2 part water dispenser for my chickens! I never uploaded the first model, but after testing it for a year, I now needed one with larger capacity. So, I updated the design and made it bigger.
The water tray fills automatically, and should stop about 8mm (about 1/3 inch) below the rim of the tray.
This must be printed solid, unless you plan on sealing it in post processing.
Required printable size: 305x305x280 (Long, Wide, High)
This is intended for use outside, so use appropriate material for sun exposure! I chose PETG, and I printed the dispenser solid.
This container should hold around 2 gallons (about 7.66 liters).
| Chicken_Waterer_2.0.blend | 1.1MB | |
| CW_base.stl | 102.4KB | |
| CW_Reservoir.stl | 100.7KB |
