Chichen Itza Pyramid Candle Mold 3D Printer Model
The file 'Chichen Itza Pyramid Candle Mold 3D Printer Model' is (stl) file type, size is 16.1KB.
The file 'Chichen Itza Pyramid Candle Mold 3D Printer Model' is (stl) file type, size is 16.1KB.
Candle mold of the Chichen Itza Pyramid (cast from the model done by ChapinEagle02: https://www.thingiverse.com/thing:675795)
Print the two halves with the base of the pyramid on top, 0.2 mm resolution, 20% infill.
Pass the wick through the small hole at the bottom, keep the two halves tightly close with two small clamps and coat the inner part with a thin layer of olive or seed oil for easing the detaching of the candle.
PLA is fine but pour the vax at a temperature of about 50 degrees. Extract carefully the candle after 2 or 3 hours, trim the wick in excess.
I have printed my model at 50% scale.
| mold_pyramid.stl | 73.3KB |
